As an Amazon Associate, I earn from qualifying purchases
If you love to work with music, then you are definitely familiar with the MPC or Music Production Controller. And, if you are new with this device, you will need some guideline on the installation process to help you out. Before start the installation, be sure, you have all of mpc addons in your hand.
Installing an MPC properly is not that hard. You just have to set up the hardware and the software, that’s all. This guide on the MPC install in easy ways will help you to learn the easiest process of setting them up. Now let’s proceed.
Setting Up the Hardware
The hardware of the MPC includes the MPC itself, and some other add-ons like the MIDI keyboard and the stand. To set them up properly, just follow the steps given below.
- Find a proper place to put the MPC. It can be on your worktable or on a stand. Just make sure you are keeping it near a plug socket if you are not using the battery-powered MPC.
- Make sure you have some space at the side of the MPC so that you can put the MIDI keyboard just beside it. This way, you can navigate both of the devices easily.
- Finally, put a stand under the MPC if you think it’s necessary. Some MPCs can’t be tilted, so the user feels uncomfortable because of it. If you feel the same way, you can add a stand under your MPC.
Software Installation Steps
Now that you are all set up with the hardware, you have to install all the necessary software. To do that, firstly you have to connect the MPC with a computer. Then follow the steps below.
Installing Basic Software
You can find the basic MPC software online or there will be a CD with the hardware you have purchased.
However, open the installer and follow the steps there to install the software. During the installation process, you might get an error message. You can ignore that and proceed. The error won’t affect your installation.
Audio Driver/MIDI Installation
Next, you have to install the audio driver. This driver helps to send and receive the sound from the device.
Besides the audio driver, you will also have to install the MIDI driver as well. If you are not using a MIDI keyboard with the MPC, you will not need to install that.
Installing these drivers are the same as installing the basic software. You will simply have to follow the steps given in the installation menu.
After you have installed the software, you have to activate it. You can activate it offline or online. In both cases, they will ask for a CD key and you can find it on the back of the CD case.
If you download the software from the internet, then the publisher will provide you with the CD key via e-mail or some other way. Use the CD key to activate the software.
Calibration of the Device
When you are done with installing all the software and the hardware, you are now ready to go. But before that, you just have to calibrate the device once.
That means you have to test every function of the MPC and make sure everything is working properly. If you find any disturbance, check if you have installed everything properly.
After the test run, you are good to go with your own Music Production Controller.
In short, all you have to do is to set up the hardware properly at the beginning. Then you can simply install all the necessary software by following the steps in this guide. Finally, I hope our guide on the MPC install in easy ways was helpful for you.